Linux on the VIA EPIA ME LVDS Mini-ITX

Via Epia Me6000 Drivers

The openings on the enclosure are for air convection hence protects the equipment from overheating. Floppy The system will boot from floppy drive. This is an option that is added during the manufacturing process.

My use of the system is most of the time working on other systems including my shell server through ssh. These values are set by the mainboard manufacturer to provide a minimal and stable system. The mainboard enables the creation of an exciting new generation of small, ergonomic, innovative and affordable embedded systems.

Keep this equipment away from humidity. Month - the month from Jan to Dec. It is not fine to look at, much to many framedrops. You can attach a serial mouse or other serial devices directly to these ports.

Driver Installation Chapter Driver Installation This chapter gives you brief descriptions of each mainboard drivers and applications. The applications will only function correctly if the necessary drivers are already installed. If the function is enabled, cameramate sd card reader drivers for mac any attempt to write data into this area will cause a beep and warning message display on screen. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. The hard disk will not work properly if you enter improper information for this category.

Before inserting the power supply connector, always make sure that all components are installed correctly to ensure that no damage will be caused. Trademarks All trademarks are the property of their respective holders.

The hardware was nicely recognized and installation went as any other i installation. Do not change these settings unless you are familiar with the chipset. Onboard Connectors and Jumpers. While installing the mainboard, carefully hold the components and closely follow the installation procedures. If you are looking for a machine for some heavy video-editing, than you could probably better go for something faster.

The specifications of your drive must match with the drive table. Advanced Chipset Features. Available Ddr Sdram Configurations. It is recommended to use a grounded wrist strap before handling computer components. Type the password, up to eight characters in length, and press Enter.

Via epia me6000 drivers

EPIA ML (EOL)

Connecting the Power Supply. Some components may be damaged if they are installed incorrectly.

Proc/cpuinfo

Disable the controller if you want to use other controller cards to connect to an audio device. The Optimized Defaults are the default values also set by the mainboard manufacturer for both optimized and stable performance of the mainboard. This machine is capable enough to be my main workstation.

One bank will undergo its refresh cycle while another is being accessed. So the main parts of the hardware where up and running without any human intervention, the hardware-recognition in the installation scripts had done their job very well. Lay this equipment on a reliable flat surface before setting it up. Only the line-out and microphone functions are available for use on the front panel. No need to do any X configuration.

VIA Technologies EPIA ME6000 - VIA Motherboard - Mini ITX User Manual

VIA EPIA ME - motherboard - mini ITX - VIA Eden ESP - CLE Series Specs

To start the thing, I wired two thin wires see picture below on the motherboard power-switch pins and when they contacted each other the thing started booting. Memory Module Installation. Detailed view on the first class home brew power switch. Choose to activate each channel separately. This would prevent unauthorized use of your computer.

This is also because the type of thing I am doing with my workstation. This didn't work out well, xine complains the system is to slow. Any attempt to operate beyond product specifications is not recommended. First, the board is faster than I had expected from a machine that could run without a fan on the processor.

Always read the safety instructions carefully. Day - day of the week, for example Friday. When adding or removing expansion cards, make sure that you unplug the power supply first.

EPIA M (EOL)